กก
Acoustic disposal of the room,
with emphasis on side walls and ceiling. The principle of indoor
sound disposal of slack should be more than the absorption, the
purpose is to make the resonance intensity decrease, to
reasonably choose the sound-absorbing material, decoration in
the room when you can consider to choose some
The material is the best sound-absorbing function. Many of the
dynamic absorption Home Furnishing environment will select the
display of furniture may usually disposal, such as thin carpet,
curtain, tapestries and other mainly for middle and high
frequency absorption effect, but the effect of low frequency
sound absorption
Fruit is very small, it is assumed that the use of too much room
in the middle and high frequency dynamic reverberation time is
short. In the professional sound disposal, common
sound-absorbing materials including sound insulation mat, sound
insulation cotton (polyester fiber sound-absorbing cotton, keel,
gypsum board).
In the audio-visual room on the disposal of sound-absorbing
building, we usually on the side wall of the installation
disposal. We can properly set some sound absorption and
relaxation, the usual way is to dispose of the original wall on
the basis of the cavity noise, but will cause the space
Inter area reduction. You can start playing on the keel or
wooden keel on the wall, then the outside layer two device on
the keel gypsum board or board, add a layer of insulation mat in
the middle of gypsum board or board, to good effect, need the
keel cavity
Filled with sound-absorbing cotton, cotton insulation outside,
add some decoration. Choose dynamic absorption material key: as
far as possible the use of glass fiber and other materials to
ensure that these materials with excellent flame retardant in
the equipment can be properly selected
Use a transparent cloth to cover up the color, there is no need
to choose the type of light quality
.
.